dnw wince716 1. Run “DNW.exe” on PC and “Communication” -> “Option” to choose proper communication parameters, then “Serial” ->“Connect”. 2. Applying power to MT688. 3. System will run and message will show in DNW windows. 4. Pressing “space” key to display action menu in DNW. 5. Using command ‘A’ to erase NAND. 6. Using command ‘F’ to format NAND. 7. Selecting ‘6’ to enable download to NAND. 8. Selecting ‘U’ command, then download “Stepldr.nb0”. 9. Press reset button to restart system. 10. Repeat step 8 to step 11. 11. Selecting ‘U’ command, then download “Eboot.bin”. 12. Unplug power. 13. Set BOOT_SEL0 – BOOT_SEL2 as “001” as step 4 described in “H/W Settings on PCB V1” section for PCB1, or “H/W Settings on PCB V1” for PCB2. 14. Applying power again and system should boot NAND.

nt_7_1_6-nk.bin
Update WinCE for SC 8200.pdf
dnw.exe
nt_7_1_5-nk.bin
secbulk.inf
secbulk.sys
SC 8200 edit MAC address.pdf

• We are an exchange download platform that only provides communication channels. The downloaded content comes from the internet. Except for download issues, please Google on your own.
• The downloaded content is provided for members to upload. If it unintentionally infringes on your copyright, please contact us.
• Please use Winrar for decompression tools
• If download fail, Try it againg or Feedback to us.
• If downloaded content did not match the introduction, Feedback to us，Confirm and will be refund.
• Before downloading, you can inquire through the uploaded person information

Nothing．