The diagram of FIFO is shown in figure 1. The FIFO consists of two component: FIFO control logic and RAM. The control logic generates the address (ADD) and write enable (WE) to the RAM so that the first data word written into the RAM is also the first data word retrieved from the RAM. As shown in the Figure 1, the RAM is implemented to operate as a FIFO. The RAM is assumed to have separate data inputs and outputs, an N-bit address bus (ADD) and an active high write enable (WE). The inputs to FIFO/Stack include PUSH, POP, INIT (all active high) in addition to the rising edge triggered CLK input. The FIFO logic will not only supply the address and write enable to the RAM, but will also supply active high flags for FULL, EMPTY, NOPOP, and NOPUSH conditions.

program
.......\FIFO_control.vhd
.......\FIFO_top.vhd
.......\Ram_beh.vhd
.......\tb_fifo.vhd

• We are an exchange download platform that only provides communication channels. The downloaded content comes from the internet. Except for download issues, please Google on your own.
• The downloaded content is provided for members to upload. If it unintentionally infringes on your copyright, please contact us.
• Please use Winrar for decompression tools
• If download fail, Try it againg or Feedback to us.
• If downloaded content did not match the introduction, Feedback to us，Confirm and will be refund.
• Before downloading, you can inquire through the uploaded person information

Nothing．