Search - unlock

Search - unlock - List

【SCM】 locks_Password DL : 0: 1．密码锁有两个密码：一是设计密码，放存在ROM中；另一个是使用密码，存于EEPROM中。 2．.密码锁的密码用4位有效数字，输入超过4位时以最后输入4位数字为准，数字范围由1~6。 3. 用实验板上K1—K6键作密码数字输入键，分别表示1~6数字，K7，K8键为命令键。其中，K7为密码设置键，K8为开锁键。蜂鸣器用作开锁指示。 4. 开机后进入初始状态，显示器显示“— — — —” 且最高一位闪动，闪动位亦表示当前数字输入位，以后每输入一位数字，闪动位向右循环移动。 5．开锁功能：在初始状态下，从K1—K6键输入密码，再按K8键。若输入密码的最后4位数与存EEPROM的使用密码内容相同或与存于ROM中的设计密码相同，则开锁成功，并用蜂码器发声指示。否则输入错误返回初始状态。开锁状态维持 60秒，超过时间，则自动关闭开锁状态，同时停止声音输出。 6.修改密码功能，在开锁状态下，用K1~K6键输入4位新的使用密码，若超过4位数则以最后4位数为准，然后按K7键，则完成密码修改。新密码存到 EEPROM中，覆盖原来的使用密码，且新密码闪动三下，表示修改成功。完成后自动回到初始状态。若不在开锁状态或在开锁状态下数字键输入不足4位，按K7键就无效，返回初始状态。 -1. There are two locks Password: First, the design of the password, put there in the ROM another is to use the password in stored in EEPROM. 2. . Cipher-lock with the password 4 digits, enter more than four hours to enter the last four figures, the figures range from 1 ~ 6. 3. With the experiment on-board keys K1-K6 password for digital input keys, respectively, 1 ~ 6 figures, K7, K8 key for command button. Which, K7 keys for password setting, K8 for the unlock key. Unlock instructions for the buzzer. 4. Boot into the initial state, the display shows "----" and a maximum of a flashing, flashing-bit digital input also said that the current place for every subsequent importation of a number of mobile flashing circle to the right place. 5. Unlock feature: in the initial state, K1-K6 keys from a password, and then key K8. If the password and keep the last 4-digit password using the EEPROM or the same content stored in ROM in the design of the same password, then unlock su
Update : 2024-05-18 Size : 52224 Publisher : 邱浩淼
【SCM】 090812 DL : 0: 楼宇门禁对讲主机程序：可编99（楼层）*99（房号）号码。与一般对讲系统不同的是：有密码激活和临时密码延长一次“不开锁”功能，可敦促房产商及时回款-Talkback host building access control procedures: can be made available for 99 (floor)* 99 (room number) numbers. Intercom system in general is different: the activation password and a temporary password to extend the " no unlock" feature, may call a timely return to paragraph房产商
Update : 2024-05-18 Size : 26624 Publisher : yang
【Other】 GAL16V8__IC-ON-LINE[1].CN DL : 0: gal16v8很好的逻辑芯片，可以取代138等芯片很好用的啊。-gal16v8 good logic chips, such as chip 138 can be replaced with, ah well.
Update : 2024-05-18 Size : 733184 Publisher : dongyou
【Windows Develop】 sem_named_lock DL : 0: use named semaphore to lock and unlock the resource, like mutex, but it use between processed.
Update : 2024-05-18 Size : 1024 Publisher : joyce
【Communication-Mobile】 84908214 DL : 0: 松下vs7解锁软件，超级好用，一定要下啊(*^__^*) -Vs7 Panasonic unlock software, super-easy to use, we must under (*^__^*) ah hee hee ... ...
Update : 2024-05-18 Size : 1144832 Publisher : 高俊辉
【Other】 vbaunlocker DL : 1: vba工程加解锁器(完全版), 可以解密 Excel的加密密码-Some time, Excel marco was protected by password, this tools it can unlock the password for Excel 2000 ~2003, very easy to use.
Update : 2024-05-18 Size : 88064 Publisher : 贫民
【Documents】 IBMT43UNLOCKTOOLS DL : 0: IBM T43P UNLOCK TOOLS
Update : 2024-05-18 Size : 1876992 Publisher : silver2009
【Crack Hack】 AES-Crypto-SN-Generator DL : 0: AES 是一种使用安全码进行信息加密的标准。它支持 128 位、192 位和 256 位的密匙。加密算法的实现在 ElAES.pas 单元中。本人将其加密方法封装在 AES.pas 单元中，只需要调用两个标准函数就可以完成字符串的加密和解密。 (* 密匙长度 *) 128 位支持长度为 16 个字符 192 位支持长度为 24 个字符 256 位支持长度为 32 个字符所有加密和解密操作在默认情况下为 128 位密匙。-A popular method of product validation is using keys similar to VJJJBX-H2BBCC-68CF7F-2BXD4R-3XP7FB-JDVQBC. These compact keys can be derived using Symmetric Key Cryptosystems such as the Advanced Encryption Standard (AES). Other Public Key Cryptosystems are available such as RSA. However, these systems generally produce larger keys (which the user will eventually have to enter into the program to unlock functionality). Smaller producing Cryptosystems exist, but it is the author s opinion that they are highly encumbered with patents. Quartz is one such example. It is a Public Key Encryption System that produces a smaller cipher text based on Hidden Field Equations (HFEs). The Quartz website is littered with phrases such as "must license" and "pay royalties". The reader is also encouraged to investigate Signature Schemes (with Recovery) as an alternative method to producing Product Keys. An example is PSS-R, a Message Recovery Signature Scheme based on RSA. PSS-R is not suitable fo
Update : 2024-05-18 Size : 768000 Publisher : harris
【Windows Develop】 block DL : 0: This is simple virus example. Programma block windows, show windows with field for unlock code
Update : 2024-05-18 Size : 179200 Publisher : Andrey
【Linux-Unix】 jiulianhuan DL : 0: 这是一个小程序，可以教你怎么解开九连环，用c写的，可以运行。-This is a small program that can teach you how to unlock nine chain, with c written, you can run.
Update : 2024-05-18 Size : 1024 Publisher : Biffo
【.net】 unlock DL : 0: 在windows域环境中，批量解除域帐户锁定-In the windows domain environment, bulk domain account lockout lifted
Update : 2024-05-18 Size : 93184 Publisher : lbnnbs
【source in ebook】 1229739182238749447 DL : 0: MT原厂的版本文件里都有SRC文件，解锁时选这个文件。支持CPU型号：6205、6205B、6208、6217、6218、6218B、6219、6223、6225、6226、 6226M、6227、6227D、6228、6229、6230、6268T -MT original version of the file are SRC file, select this file when you unlock. Support CPU Type: 6205,6205 B, 6208,6217,6218,6218 B, 6219,6223,6225,6226, 6226M, 6227,6227 D, 6228,6229,6230,6268 T
Update : 2024-05-18 Size : 6059008 Publisher : 杨杰
【Other】 liu2 DL : 0: 1、从网上下载一个五笔字型的软件包 2、分别采用-i、-ivh参数对其进行安装 3、删除上述安装的软件 4、利用rpm查询上述软件 5、查询系统中所有含有关键字mysql的包，若没有对其进行安装 6、利用tar命令实现对/etc下的所有扩展名为.conf的文件的打包、压缩、查看操作并且把相应的包文件解开到你的主目录中 7、利用Vi编辑器创建一个文件XXXXX.out(XXXXX为你的学号) 8、熟悉Vi编辑器的主要命令 -1, from the Internet to download a five-stroke package 2, respectively-i,-ivh to install three of its parameters, remove the installed software 4, using rpm inquiries about the software, 5, all containing the keyword query system mysql package, if it did not make install 6, using tar command to realize/etc all under the extension. conf files packaged, compressed, view the operation and to unlock the corresponding package files to your home directory 7, using Vi editor to create a file XXXXX.out (XXXXX for your Student ID) 8, are familiar with the major commands Vi Editor
Update : 2024-05-18 Size : 271360 Publisher : chongchong
【VHDL-FPGA-Verilog】 project DL : 0: 利用VHDL实现三个简单的程序：BCD加法器；ALU算术逻辑单元；简单密码锁设计，具有输入密码和数据比较两种功能，由M决定是写入还是开锁。而数据写入是采用列地址与输入数相结合的的方法，存入初始密码；开锁时，密码以输入，再输入的数据逐个与输入的一组数据比较，完全吻合则开锁。-The use of VHDL to accomplish three simple procedures: BCD adder ALU arithmetic logic unit simple lock design, with input passwords and data comparing the two functions, the decision written by M, or unlock. The data is used to write the column address and enter the number of combining methods into the initial password unlock, the password to enter, and then enter the data one by one with the input a set of data comparison, the perfect match then unlock.
Update : 2024-05-18 Size : 159744 Publisher : 张晓风
【Other】 tools_file DL : 0: Tuxedo编程通用文件操作函数：判断文件是否存在，给文件夹锁，给文件解锁，写日志文件，读文件内容-Tuxedo Programming General file manipulation functions: to determine whether the file exists, give the folder lock, to unlock the file, write the log file, read contents of the file
Update : 2024-05-18 Size : 2048 Publisher : zpf
【SQL Server】 UNLOCKSQL DL : 0: PB下编写的，自动检查SQL SERVER死锁并解锁的程序代码。-PB prepared, and automatically checks for SQL SERVER deadlock and unlock the program code.
Update : 2024-05-18 Size : 125952 Publisher : PZG
【Documents】 79_Unlock DL : 0: unlock v79 by sound track
Update : 2024-05-18 Size : 57344 Publisher : dimo043
【VHDL-FPGA-Verilog】 mimasuo DL : 0: 设计一个具有较高安全性和较低成本的通用电子密码锁，其具体功能要求如下：(1) 数码输入：每按下一个数字键，就输入一个数值，并在显示器上的最右方显示出该数值，同时将先前输入的数据依序左移一个数字位置。(2) 数码清除：按下此键可清除前面所有的输入值，清除成为“0000”。(3) 密码更改：按下此键时会将目前的数字设定成新的密码。(4) 激活电锁：按下此键可将密码锁上锁。(5) 解除电锁：按下此键会检查输入的密码是否正确，密码正确即开锁。 -Design of a high security and lower-cost generic electronic locks, its specific functional requirements are as follows: (1) Digital Input: Each press a number key, you enter a numeric value, and the display on the far right shows out the value, while the previous input data in sequence left a number of locations. (2) Digital Clear: Press this key to clear all the previous input values, clear as " 0000." (3) password change: press this key will set the current figure into a new password. (4) to activate electric locking: Press this key lock can be unlocked. (5) The lifting of electric locking: Press this button will check the password is correct, the password is correct that the unlock.
Update : 2024-05-18 Size : 2048 Publisher : kxsh
【Other】 phpsay_2 DL : 0: 后台控制是否开启伪静态主题锁定/解锁，锁定状态的主题不可回复支持多图多视频支持上传图片，可在后台设置哪些用户组有此权限支持头像上传及截取修复了由于删帖造成的回复楼层错位的BUG 优化了相关代码-Background controls open the pseudo-static Theme lock/unlock, lock the subject of non-reply Multi-Tudo video Support for uploading images which can be set up in the background which user group have this permission Support for picture upload and interception of Repair caused due to deletion quote reply floors misplaced BUG Optimization of the relevant code
Update : 2024-05-18 Size : 431104 Publisher : bingshuang
【Linux-Unix】 pipe DL : 0: 该程序先使用pipe()函数创建一个临时通信管道，然后使用fork()创建两个子进程，使用write()函数向管道两次写入”I’m parent process。”的信息，两个子进程使用read()函数从管道中获取信息并输出，然后两个子进程分别向管道写入”I’m child process a”和”I’m child process b”信息，由父进程从管道中读出并显示。在使用write()函数前，需要先使用lockf()函数锁住管道，写完信息后再解锁管道。-The program first use pipe () function to create a temporary communications pipe, and then use the fork () to create two sub-processes, use the write () function is written twice to the pipeline " I' m parent process." Information, the use of two sub-processes read () function to obtain information from the pipe, and output, and then two sub-processes to the pipeline were to write " I' m child process a" and the " I' m child process b" information, from the parent process from the pipeline to read and display the . Using the write () function, you need to first use lockf () function is locked pipelines, finish information and then unlock the pipes.
Update : 2024-05-18 Size : 1024 Publisher : JK

« 1 2 ... 7 8 9 10 11 1213 14 15 16 17 ... 41 »