Search - monitor

Search - monitor - List

【SNMP】 SNMP Monitor DL : 1: 学习 Java Snmp 网络编程很好的入门资料
Update : 2009-03-01 Size : 9108689 Publisher : lglg5454
【ARM-PowerPC-ColdFire-MIPS】 fireware MicroMonitor的源代码 DL : 1: An Embedded System Boot Platform The term boot monitor refers to the code that is run on a computer system as the lowest level of firmware resident to the hardware platform. You can find various types of boot monitors on a wide range of computer systems, certainly not limited to embedded systems. In general, a typical boot monitor provides the system with some very basic startup capabilities, and provides a bit of insurance to the user because if all else fails (meaning the upper layers of the installed OS), the boot monitor will still be there to fall back on. Typically, a boot monitor is built to provide a basic set of capabilities for diagnostic and system startup, and once the system has started up, the boot monitor is no longer in the picture. This is where I would like to introduce the term embedded system boot platform as a superset of a typical boot monitor. An embedded system boot platform, like a boot monitor, is a target-resident environment that provides a suite of capabilities that enhances the development process. In its simplest form, the platform speeds up some of the early stages of embedded systems development. In more elaborate configurations, the platform can provide a simple flash file system, Trivial File Transfer Protocol (TFTP)/Xmodem interfaces for application transfer, and a variety of additional commands and capabilities that provide enhancements to the development environment. As a part of a development strategy for an organization, an embedded system boot platform provides a common base on which to build a project. It is an integral part of the application itself, providing the system with a core set of features that are generic in nature and should be usable by application code regardless of the operating system. With that definition in mind, MicroMonitor is an embedded system boot platform.
Update : 2009-05-15 Size : 4646596 Publisher : wgf08062000
【USB develop】 USB_monitor_source_files DL : 1: Usb monitor source code
Update : 2010-10-18 Size : 18416 Publisher : tnaks@_
【SCM】 RTD2523原理图及源码 DL : 0: RTD2523原理图及源码.rar 台湾瑞昱半导体MONITOR方案主板原理图及源码。供大家参考学习。
Update : 2010-11-22 Size : 1649847 Publisher : mrwangrongsheng@163.com
【Books】加密解密技术内幕 DL : 0: 加密解密技术内幕第1章 PE文件格式深入研究 1.1 PE文件格式格式纵览 1.1.1 区块（Section） 1.1.2 相对虚拟地址（Relative Virtual Addresses） 1.1.3 数据目录 1.1.4 输入函数（Importing Functions） 1.2 PE文件结构 1.2.1 The MS-DOS头部 1.2.2 IMAGE_NT_HEADERS头部 1.2.3 区块表（The Section Table） 1.2.4 各种块（Sections）的描述 1.2.5 输出表 1.2.6 输出转向（Export Forwarding） 1.2.7 输入表 1.2.8 绑定输入（Bound import） 1.2.9 延迟装入数据（Delayload Data） 1.2.10 资源 1.2.11 基址重定位（Base Relocations） 1.2.12 调试目录（DebugDirectory） 1.2.13 NET头部 1.2.14 TLS初始化 1.2.15 程序异常数据第2章 PE分析工具编写 2.1 文件格式检查 2.2 FileHeader和OptionalHeader内容的读取 2.3 得到数据目录(Data Dircetory)信息 2.4 得到块表(SectionTable)信息 2.5 得到输出表(ExportTable)信息 2.6 得到输入表(ImportTable)信息第3章 Win32 调试API 3.1 Win32调试API原理 3.1.1 调试相关函数简要说明 3.1.2 调试事件 3.1.3 如何在调试时创建并跟踪一个进程 3.1.4 最主要的循环体 3.1.5 如何处理调试事件 3.1.6 线程环境详解 3.1.7 如何在另一个进程中注入代码 3.2 利用调试API编写脱壳机 3.2.1 tElock 0.98脱壳简介 3.2.2 脱壳机的编写 3.3 利用调试API制作内存补丁 3.3.1 跨进程内存存取机制 3.3.2 Debug API机制第4章 Windows下的异常处理 4.1 基本概念 4.1.1 Windows下的软件异常 4.1.2 未公开的可靠吗 4.2 结构化异常处理（SEH） 4.2.1　异常处理的基本过程 4.2.2 SEH的分类 4.2.3 相关API 4.2.4　SEH相关数据结构 4.3 异常处理程序设计 4.3.1　顶层（top-level）异常处理 4.3.2 线程异常处理 4.3.3 异常处理的堆栈展开（Stack unwind） 4.3.4 异常处理程序设计中的几个注意事项： 4.4 SEH的简单应用 4.4.1 Win9x下利用SEH进ring0 4.4.2 利用SEH实现对自身的单步自跟踪 4.4.3 其它应用 4.5 系统背后的秘密 4.6 VC是如何封装系统提供的SEH机制的 4.6.1 扩展的EXCEPTION_REGISTRATION级相关结构 4.6.2 数据结构组织 4.7 Windows XP下的向量化异常处理（VEH）第5章软件加密技术 5.1 反调试技术（Anti-Debug） 5.1.1 句柄检测 5.1.2 SoftICE后门指令 5.1.3 int68子类型 5.1.4 ICECream子类型 5.1.5 判断NTICE服务是否运行 5.1.6 INT 1 检测 5.1.7 利用UnhandledExceptionFilter检测 5.1.8 INT 41子类型 5.2 反跟踪技术（Anti-Trace） 5.2.1 断点检测 5.2.2 利用SEH反跟踪 5.2.3 SMC技术实现 5.3 反加载技术(Anti-Loader) 5.3.1 利用TEB检测 5.3.2 利用IsDebuggerPresent函数检测 5.3.3 检查父进程 5.4 反DUMP技术(Anti-Dump) 5.5 文件完整性检验 5.5.1 CRC校验实现 5.5.2 校验和（Checksum） 5.5.3 内存映像校验 5.6 反监视技术(Anti-Monitor) 5.6.1 窗口方法检测 5.6.2 句柄检测 5.7 反静态分析技术 5.7.1 扰乱汇编代码 5.7.2 花指令 5.7.3 信息隐藏 5.8 代码与数据结合技术 5.9 软件保护的若干忠告第6章加壳软件编写 6.1 外壳编写基础 6.1.1 判断文件是否是PE格式的EXE文件 6.1.2 文件基本数据的读入 6.1.3 额外数据保留 6.1.4 重定位数据的去除 6.1.5 文件的压缩 6.1.6 资源区块的处理 6.1.7 区块的融合 6.1.8 输入表的处理 6.1.9 外壳部分的编写 6.1.10 将外壳部分添加至原程序 6.1.10 小结 6.2 加壳程序综合运用的实例 6.2.1 程序简介 6.2.2 加壳子程序（WJQ_ShellBegin（）） 6.2.3 PE外壳程序 6.2.4 加进Anti技术 6.2.5 通过外壳修改被加壳PE 6.2.6 VC++调用汇编子程序第7章如何让壳与程序融为一体 7.1 序 7.1.1 为何需要壳和程序一体化 7.1.2 为阅读此章节需要的知识 7.1.3 基于此章节用的的例子程序说明 7.2 欺骗检查壳的工具 7.2.1 fi是如何检查壳的 7.2.2 欺骗fi 7.3 判断自己是否给脱壳了 7.3.1 判断文件尺寸 7.3.2 检查标记 7.3.3 外部检测(使用dll) 7.3.4 hook 相关的api(防止loader和调试api) 7.4 使用sdk把程序和壳溶为一体 7.4.1 sdk的意义 7.4.2 做一个带sdk的壳 7.5 后记:关于壳和程序的思考第8章 Visual Basic 6 逆向工程 8.1 简介 8.2 P-code传奇 8.3 VB编译奥秘 8.4 VB与COM 8.5 VB可执行程序结构研究 8.6 VB程序事件解读 8.7 VB程序图形界面（GUI）解读 8.8 VB程序执行代码研究 8.9 我们的工具 8.10 VB程序保护篇附录A 在Visual C++中使用内联汇编附录B 在Visual Basic中使用汇编
Update : 2010-11-23 Size : 1389111 Publisher : vachel
【Driver Develop】 USB monitor DL : 1: Update : 2011-05-15 Size : 14168 Publisher : songluhua@gmail.com
【Develop Tools】 Delphi7_Lite_Full_20110501 DL : 0: 【Borland是一家令人敬仰的公司,當值Borland已成往事之際,謹以此產品獻給曾經的Borland,紀念已經仙逝的Borland,藉以緬懷Borland傳奇中的經(精)典Delphi7.本產品僅供學習交流之用,未與任何盈利為目的,請勿用於任何非法的商業用途,否則後果自負.】 Delphi7 Lite,簡約而不簡單,一次安裝,到處運行.內含4彈:Tiny/Mini/Meduim/Full,功能和體積由小至大,力求達到功能和體積的完美平衡.已作性能優化及優量精簡,含安裝/綠色便攜版二合一,集成了部分常用高效的IDE專家及外掛程式,致力於把Delphi7打造成一個現代化(相對而言)的整合式開發環境,使用本產品將使你在開發效率/使用體驗/系統相容性等方面上相對原版有大幅提高. 关键特性: 一次安裝,到處運行.第一次需安裝,以後每次只需註冊即可. 已安裝集成現在所有可用的升級補丁(至Delphi7 Update 1.1,IDE版本號為Build 8.1),集成目前絕大多數的Bug Fix Pack. 支援現在所有正在使用的Windows版本:Windows7, 2008 R2, Vista, XP, 2008, 2003, 2000, Me, 98, 和 NT 4.0,支援非管理員許可權使用者安裝,支援UAC. 特別地對Windows7提供全面支援. 去除了所有多餘的安裝選項但保留了原始程式碼選項,移除了非必需的檔(ModelMaker,InterBase,MergeModules,Extra Docs,Images,MDAC等). 採用安裝後動態編譯生成RTL,VCL的DCU檔,極大的減小了安裝檔體積. 可選將Delphi7 RTL/VCL替換為Delphi2007 的RTL/VCL,讓Delphi7支援Delphi2007新增的Vista屬性. 可選將Delphi7 RTL/VCL 恢復為使用官方原始的源碼檔,僅供用於部分協力廠商元件兼容性的可能需要(不推薦). 安裝程式是設計為可重複安裝的.您在安裝新版本時,如果安裝程式沒有特別指明,則不需要先刪除舊的版本,直接升級即可,所有設置都會保留,原Delphi安裝的控制項及設置等會自動導入新安裝IDE環境中. 安裝程式內置了可直接選擇的”綠色便攜版安裝模式”,使用此模式安裝後目的檔案夾即成為一個可移動的綠色版,實現徹底的名符其實的”安裝/綠色便攜版二合一”. 安裝程式自帶獨立的綠化註冊程式(D7LiteReg.exe),方便您快速地恢復Delphi7開發環境(控制項/專家/設置).直接複製整個Delphi目錄,再執行D7LiteReg.exe即可完成Delphi的註冊工作.同樣方法可適用于對其它Delphi7版本進行綠化註冊,如Delphi7 SECOND EDITION v7.2. 安裝程式支援”使用現有的原始程式碼重編譯安裝(僅覆蓋安裝時有效)”或”使用外部的Delphi7-source原始程式碼來編譯安裝”,更多詳情請查看說明. 安裝程式帶附加的命令列功能.支援對已安裝程式的功能表/註冊表/雜項進行修復,使用命令列參數/?或/help查看更多詳情. 安裝程式支援附加的命令列參數以實現額外功能.支援對已安裝Delphi7程式的功能表/註冊表/雜項進行修復,常用的命令列參數已直接集成到了安裝程式中,在視窗中點擊右鍵或使用命令列參數/?或/help查看更多詳情. 安裝程式會根據安裝目的機器性能自動選擇不同的安裝元件. 安裝程式支援多語言介面(含中文簡體/繁體/英文). 同時可選僅替換為Delphi2007中windows相關pas,以支援XP/Vista API及視窗屬性,不同于完全替換Delphi2007 RTL/VCL,能最大程度保持Delphi7的相容性的同時支援vista的新API及視窗屬性. 代碼編輯器顏色方案設為Delphi2006樣式. 包含程式設計專用字體Consolas (推薦字體大小為10並且啟用ClearType). IDE及VCL預設字體由原先的MS Sans Serif改為Tahoma,介面看上去更為美觀. 可選擇修改Delphi IDE本身支援XP風格,在設計時即可見到程式運行的XP效果,所見即所得. 集成DelphiZLib 1.2.5(ZLibEx.pas),可選擇升級內置的ZLib 1.04至ZLib 1.2.5. 集成VCL Fix Pack 1.4,需要在工程中手動引用單元VCLFixPack.pas. 集成Midas Speed Fix 1.2,需要在工程中手動引用單元MidasSpeedFix.pas. 集成以下來自www.delphi-jedi.org的擴展的Win32Api單元: SHELL LITE :: Microsoft Shell Lightweight Utility API, v.1.2/SNMP :: Microsoft headers for Simple Network Management Protocol definitions/WINSOCK 2 :: Winsock 2 API (Windows Sockets). 集成MySQL Driver for DBExpress，支援MySQL 3.22/4.0/4.1/5.0 驅動程式. 集成Newly Delphi Features Extented Components,移植自Delphi7以后版本新增的控制項,如Vista Dialogs等,讓Delphi7也可以開發Vista風格對話方塊的程式. 包含下列專家或工具(依據版本不同有所差異): Delphi IDE 外掛程式 DelphiSpeedUp 3.1.(IDE加速). Delphi IDE 外掛程式 DDevExtensions 2.3.(增強IDE中工程的設置及編譯,可為工程增加不同版本編譯配置如release/debug版). Delphi 專家 GExperts 1.34 Experimental.(超級IDE專家). Delphi 專家 DelforExp 2.5.(代碼格式化工具). Delphi 專家 UnitExpert(提高IDE單元操作效率工具). Delphi 專家 CnWizards 0.9.7.599.(由中國人開發的超級IDE專家,支援原始程式碼結構高亮連線顯示,能自動備份恢復已安裝控制項資訊,製作自己綠化版delphi的好工具). Delphi 工具 DelphiDistiller 1.85.(選擇IDE啟動時載入的控制項及設置工具). Spy工具Microsoft Spy++ v7.1和Spy4Win (Spy for Window) v0.20b. EXE/DLL依賴關係分析工具Dependency Walker 2.2. DLL匯出函數檢視器DLL Export Viewer v1.42. BDE (Borland Database Engine 5.2), 及相關工具BDE Administrator, SQL Explorer, Database Desktop, SQL Monitor, Data Pump等. BDE 示例資料庫(別名DBDEMOS).
Update : 2011-06-16 Size : 77731415 Publisher : ygman@qq.com
【SourceCode】 android十大例子 DL : 2: 1、图片浏览器（Picture Viewer） 2 、文件浏览器（File Browser） 3 、通讯录（Contact） 4 、任务管理器（Task Manager） 5 、音乐播放器（Rock Player） 6 、天气预报（Android Weather Forecast） 7 、多媒体播放器（Android Media Player） 8、短信语音播报（Speak Message Service） 9、手机远程监控（Cam Monitor） 10、贪吃蛇游戏（Snake）
Update : 2011-09-01 Size : 3103789 Publisher : wangyingjie2008@163.com
【Other Embeded program】 2460aUSBMonitorCode_v051223 DL : 1: SMDK2460 usb monitor program. compiler ADS 1.2 , use DNW to download program to target board.
Update : 2011-09-08 Size : 1695530 Publisher : testsb
【Video Capture】 Cam Monitor 查看摄像头软件 DL : 0: 一款用来查看摄像头软件
Update : 2011-11-02 Size : 132147 Publisher : gujin1987@163.com
【Windows Develop】 Senfore_DragDrop_v4.1 DL : 0: Drag and Drop Component Suite Version 4.1 Field test 5, released 16-dec-2001 ?1997-2001 Angus Johnson & Anders Melander http://www.melander.dk/delphi/dragdrop/ ------------------------------------------- Table of Contents: ------------------------------------------- 1. Supported platforms 2. Installation 3. Getting started 4. Known problems 5. Support and feedback 6. Bug reports 7. Upgrades and bug fixes 8. Missing in this release 9. New in version 4.x 10. TODO 11. Licence, Copyright and Disclaimer 12. Release history ------------------------------------------- 1. Supported platforms: ------------------------------------------- This release supports Delphi 4-6 and C++ Builder 4-5. Earlier versions of Delphi and C++ Builder will not be supported. If you need Delphi 3 or C++ Builder 3 support you will have to revert to version 3.7 of the Drag and Drop Component Suite. The library has been tested on NT4 service pack 5 and Windows 2000. Windows 95, 98, ME and XP should be supported, but has not been tested. Linux and Kylix are not supported. There are *NO* plans to port the library to Kylix. The drag and drop protocols available on Linux are too much of a mess at this time. ------------------------------------------- 2. Installation: ------------------------------------------- 1) Before you do anything else, read the "Known problems" section of this document. 2) Install the source into a directory of your choice. The files are installed into three directories: DragDrop DragDrop\Components DragDrop\Demo 3) Install and compile the appropriate design time package. The design time packages are located in the Components directory. Each version of Delphi and C++ Builder has its own package; DragDropD6.dpk for Delphi 6, DragDropD5.dpk for Delphi 5, DragDropC5.bpk for C++ Builder 5, etc. 4) Add the Drag and Drop Component Suite components directory to your library path. 5) Load the demo project group: demo\dragdrop_delphi.bpg for Delphi 5 and 6 demo\dragdrop_bcb4.bpg for C++ Builder 4 demo\dragdrop_bcb5.bpg for C++ Builder 5 The project group contains all the demo applications. 6) If your version of Delphi does not support text format DFM files (e.g. Delphi 4 doesn't), you will have to use the convert.exe utility supplied with Delphi to convert all the demo form files to binary format. A batch file, convert_forms_to delphi_4_format.bat, is supplied in the demo directory which automates the conversion process. The C++ Builder demo forms are distributed in binary format. 7) If upgrading from a previous version of the Drag and Drop Component Suite, please read the document "upgrading_to_v4.txt" before you begin working on your existing projects. Note about "Property does not exist" errors: Since all demos were developed with the latest version of Delphi, most of the demo forms probably contains references to properties that doesn't exist in earlier versions of Delphi and C++ Builder. Because of this you will get fatal run-time errors (e.g. "Error reading blahblahblah: Property does not exist.") if you attemt to run the demos without fixing this problem. Luckily it is very easy to make the forms work again; Just open the forms in the IDE, then select "Ignore All" when the IDE complains that this or that property doesn't exist and finally save the forms. ------------------------------------------- 3. Getting started: ------------------------------------------- It is recommended that you start by running each of the demo applications and then look through the demo source. Each demo application is supplied with a readme.txt file which briefly describes what the demo does and what features it uses. The demos should be run in the order in which they are listed in the supplied project group. Even if you have used previous versions of the Drag and Drop Component Suite it would be a good idea to have a quick look at the demos. The library has been completely rewritten and a lot of new features has been added. ------------------------------------------- 4. Known problems: ------------------------------------------- * The Shell Extension components does not support C++ Builder 4. For some strange reason the components causes a link error. * There appear to be sporadic problems compiling with C++ Builder 5. Several user have reported that they occasionally get one or more of the following compiler errors: [C++ Error] DragDropFile.hpp(178): E2450 Undefined structure '_FILEDESCRIPTORW' [C++ Error] DropSource.hpp(135): E2076 Overloadable operator expected I have not been able to reproduce these errors, but I believe the following work around will fix the problem: In the project options of *all* projects which uses these components, add the following conditional define: NO_WIN32_LEAN_AND_MEAN The define *must* be made in the project options. It is not sufficient to #define it in the source. If you manage to compile with C++ Builder (any version), I would very much like to know about it. * Delphi's and C++ Builder's HWND and THandle types are not compatible. For this reason it might be nescessary to cast C++ Builder's HWND values to Delphi's THandle type when a HWND is passed to a function. E.g.: if (DragDetectPlus(THandle(MyControl->Handle), Point(X, Y))) { ... } * Virtual File Stream formats can only be pasted from the clipboard with live data (i.e. FlushClipboard/OleFlushClipboard hasn't been called on the data source). This problem affects TFileContentsStreamOnDemandClipboardFormat and the VirtualFileStream demo. This is believed to be a bug in the Windows clipboard and a work around hasn't been found yet. * Asynchronous targets appears to be broken in the current release. * When TDropFileTarget.GetDataOnEnter is set to True, the component doesn't work with WinZip. Although the file names are received correctly by TDropFileTarget, WinZip doesn't extract the files and the files thus can't be copied/moved. This is caused by a quirk in WinZip; Apparently WinZip doesn't like IDataObject.GetData to be called before IDropTarget.Drop is called. ------------------------------------------- 5. Support and feedback: ------------------------------------------- Since these components are freeware they are also unsupported. You are welcome to ask for help via email, but I cannot guarantee that I will have time to help you or even reply to your mail. If you absolytely can't live without my help, you can alway try bribing me. You can also try asking for help in the Delphi newsgroups. Since the Drag and Drop Component Suite is in widespread use, there's a good chance another user can help you. I recommend the following newsgroups for issues regarding this library (or COM based Drag/Drop in general): borland.public.delphi.winapi borland.public.delphi.thirdparty-tools borland.public.delphi.oleautomation borland.public.cppbuilder.winapi borland.public.cppbuilder.thirdparty-tools Please choose the most appropiate newsgroup for your question. Do not cross post to them all. Before posting to the newsgroups, I suggest you try to search for an answer on the Google (DejaNews) search engine: http://groups.google.com Chances are that your question has been asked and answered before. If you have suggestions for improvements please mail them to me: anders@melander.dk Please include the words "Drag Drop" in the subject of any email regarding these components. ------------------------------------------- 6. Bug reports: ------------------------------------------- Bugs can either be reported at my home page (http://www.melander.dk/) or mailed directly to me: anders@melander.dk. When reporting a bug, please provide the following information: * The exact version of the Drag and Drop Component Suite you are using. * The exact version of Delphi or C++ Builder you are using. * The name and exact version of your operating system (e.g. NT4 SP5). * The exact version of the Internet Explorer installed on your system. If you can provide me with a minimal application which reproduces the problem, I can almost guarantee that I will be able to fix the problem in very short time. Please supply only the source files (pas, dfm, dpr, dof, res, etc.) and mail them as a single zip file. If I need a compiled version I will ask for it. If you feel you need to send me a screen shot, please send it in GIF or PNG format. If you mail a bug report to me, please include the words "Drag Drop" in the subject of your email. ------------------------------------------- 7. Upgrades and bug fixes: ------------------------------------------- Upgrades can be downloaded from my home page: http://www.melander.dk/delphi/dragdrop/ Bug fixes will also be posted to the above page. If you have registered for update notification via the installation program, you will receive email notification when a new release is available. You will not be notified of bug fixes. You can use the installation program to check for and download new releases and to check for known bugs. Note: If a new release is made available and you are not notified even though you registered for notification, you probably mistyped your email address during installation; About 10% of all registrations supply an invalid email address. ------------------------------------------- 8. Missing in this release: ------------------------------------------- * On-line help has not been updated and included in the kit due to late changes in the Delphi 6 help system and lack of time. If time permits, I will update the help and include it in a future release. ------------------------------------------- 9. New in version 4.x: ------------------------------------------- * Completely redesigned and rewritten. Previous versions of the Drag and Drop Component Suite used a very monolithic design and flat class hierachy which made it a bit cumbersome to extend the existing components or implement new ones. Version 4 is a complete rewrite and redesign, but still maintains compatibility with previous versions. The new V4 design basically separates the library into three layers: 1) Clipboard format I/O. 2) Data format conversion and storage. 3) COM Drag/Drop implementation and VCL component interface. The clipboard format layer is responsible for reading and writing data in different formats to and from an IDataObject interface. For each different clipboard format version 4 implements a specialized class which knows exactly how to interpret the clipboard format. For example the CF_TEXT (plain text) clipboard format is handled by the TTextClipboardFormat class and the CF_FILE (file names) clipboard format is handled by the TFileClipboardFormat class. The data format layer is primarily used to render the different clipboard formats to and from native Delphi data types. For example the TTextDataFormat class represents all text based clipboard formats (e.g. TTextClipboardFormat) as a string while the TFileDataFormat class represents a list of file names (e.g. TFileClipboardFormat) as a string list. The conversion between different data- and clipboard formats is handled by the same Assign/AssignTo mechanism as the VCLs TPersistent employes. This makes it possible to extend existing data formats with support for new clipboard formats without modification to the existing classes. The drag/drop component layer has several tasks; It implements the actual COM drag/drop functionality (i.e. it implements the IDropSource, IDropTarget and IDataObject interfaces (along with several other related interfaces)), it surfaces the data provided by the data format layer as component properties and it handles the interaction between the whole drag/drop framework and the users code. The suite provides a multitude of different components. Most are specialized for different drag/drop tasks (e.g. the TDropFileTarget and TDropFilesSource components for drag/drop of files), but some are either more generic, handling multiple unrelated formats, or simply helper components which are used to extend the existing components or build new ones. * Support for Delphi 6. Version 4.0 was primarily developed on Delphi 6 and then ported back to previous versions of Delphi and C++ Builder. * Support for Windows 2000 inter application drag images. On Windows platforms which supports it, drag images are now displayed when dragging between applications. Currently only Windows 2000 supports this feature. On platforms which doesn't support the feature, drag images are only displayed whithin the source application. * Support for Windows 2000 asynchronous data transfers. Asynchronous data tranfers allows the drop source and targets to perform slow transfers or to transfer large amounts of data without blocking the user interface while the data is being transfered. For platforms other than Windows 2000, the new TDropSourceThread class can be used to provide similar (but more limited) asynchronous data transfer capabilities. * Support for optimized and non-optimized move. When performing drag-move operations, it is now possible to specify if the target (optimized move) or the source (non-optimized move) is responsible for deleting the source files. * Support for delete-on-paste. When data is cut to the clipboard, it is now possible to defer the deletion of the source data until the target actually pastes the data. The source is notified by an event when the target pastes the data. * Extended clipboard support. All formats and components (both source and target) now support clipboard operations (copy/cut/paste) and the VCL clipboard object. * Support for shell drop handlers. The new TDropHandler component can be used to write drop handler shell extensions. A drop handler is a shell extension which is executed when a user drags and drops one or more files on a file associated wth your application. * Support for shell drag drop handlers. The new TDragDropHandler component can be used to write drag drop handler shell extensions. A drag drop handler is a shell extension which can extend the popup menu which is displayed when a user drag and drops files with the right mouse button. * Support for shell context menu handlers. The new TDropContextMenu component can be used to write context menu handler shell extensions. A context menu handler is a shell extension which can extend the popup menu which is displayed when a user right-clicks a file in the shell. * Drop sources can receive data from drop targets. It is now possible for drop targets to write data back to the drop source. This is used to support optimized-move, delete-on-paste and inter application drag images. * Automatic re-registration of targets when the target window handle is recreated. In previous versions, target controls would loose their ability to accept drops when their window handles were recreated by the VCL (e.g. when changing the border style or docking a form). This is no longer a problem. * Support for run-time definition of custom data formats. You can now add support for new clipboard formats without custom components. * Support for design-time extension of existing source and target components. Using the new TDataFormatAdapter component it is now possible to mix and match data formats and source and target components at design time. E.g. the TDropFileTarget component can be extended with URL support. * It is now possible to completely customize the target auto-scroll feature. Auto scroling can now be completely customized via the OnDragEnter, OnDragOver, OnGetDropEffect and OnScroll events and the public NoScrollZone and published AutoScroll properties. * Multiple target controls per drop target component. In previous versions you had to use one drop target component per target control. With version 4, each drop target component can handle any number of target controls. * It is now possible to specify the target control at design time. A published Target property has been added to the drop target components. * Includes 20 components: - TDropFileSource and TDropFileTarget Used for drag and drop of files. Supports recycle bin and PIDLs. - TDropTextSource and TDropTextTarget Used for drag and drop of text. - TDropBMPSource and TDropBMPTarget Used for drag and drop of bitmaps. - TDropPIDLSource and TDropPIDLTarget Used for drag and drop of PIDLs in native format. - TDropURLSource and TDropURLTarget Used for drag and drop of internet shortcuts. - TDropDummyTarget Used to provide drag/drop cursor feedback for controls which aren't registered as drop targets. - TDropComboTarget (new) Swiss-army-knife target. Accepts text, files, bitmaps, meta files, URLs and file contents. - TDropMetaFileTarget (new) Target which can accept meta files and enhanced meta files. - TDropImageTarget (new) Target which can accept bitmaps, DIBs, meta files and enhanced meta files. - TDragDropHandler (new) Used to implement Drag Drop Handler shell extensions. - TDropHandler (new) Used to implement Shell Drop Handler shell extensions. - TDragDropContext (new) Used to implement Shell Context Menu Handler shell extensions. - TDataFormatAdapter (new) Extends the standard source and target components with support for extra data formats. An alternative to TDropComboTarget. - TDropEmptySource and TDropEmptyTarget (new) Target and source components which doesn't support any formats, but can be extended with TDataFormatAdapter components. * Supports 27 standard clipboard formats: Text formats: - CF_TEXT (plain text) - CF_UNICODETEXT (Unicode text) - CF_OEMTEXT (Text in the OEM characterset) - CF_LOCALE (Locale specification) - 'Rich Text Format' (RTF text) - 'CSV' (Tabular spreadsheet text) File formats: - CF_HDROP (list of file names) - CF_FILEGROUPDESCRIPTOR, CF_FILEGROUPDESCRIPTORW and CF_FILECONTENTS (list of files and their attributes and content). - 'Shell IDList Array' (PIDLs) - 'FileName' and 'FileNameW' (single filename, used for 16 bit compatibility). - 'FileNameMap' and 'FileNameMapW' (used to rename files, usually when dragging from the recycle bin) Image formats: - CF_BITMAP (Windows bitmap) - CF_DIB (Device Independant Bitmap) - CF_METAFILEPICT (Windows MetaFile) - CF_ENHMETAFILE (Enhanced Metafile) - CF_PALETTE (Bitmap palette) Internet formats: - 'UniformResourceLocator' and 'UniformResourceLocatorW' (Internet shortcut) - 'Netscape Bookmark' (Netscape bookmark/URL) - 'Netscape Image Format' (Netscape image/URL) - '+//ISBN 1-887687-00-9::versit::PDI//vCard' (V-Card) - 'HTML Format' (HTML text) - 'Internet Message (rfc822/rfc1522)' (E-mail message in RFC822 format) Misc. formats: - CF_PREFERREDDROPEFFECT and CF_PASTESUCCEEDED (mostly used by clipboard) - CF_PERFORMEDDROPEFFECT and CF_LOGICALPERFORMEDDROPEFFECT (mostly used for optimized-move) - 'InShellDragLoop' (used by Windows shell) - 'TargetCLSID' (Mostly used when dragging to recycle-bin) * New source events: - OnGetData: Fired when the target requests data. - OnSetData: Fired when the target writes data back to the source. - OnPaste: Fired when the target pastes data which the source has placed on the clipboard. - OnAfterDrop: Fired after the drag/drop operation has completed. * New target events: - OnScroll: Fires when the target component is about to perform auto-scroll on the target control. - OnAcceptFormat: Fires when the target component needs to determine if it will accept a given data format. Only surfaced in the TDropComboTarget component. * 8 new demo applications, 19 in total. ------------------------------------------- 10. TODO (may or may not be implemented): ------------------------------------------- * Async target demo (with and without IAsyncOperation support). * Scrap file demo. * Native Outlook message format. * Structured storage support (IStorage encapsulation). ------------------------------------------- 11. Licence, Copyright and Disclaimer: ------------------------------------------- The Drag and Drop Component Suite is Copyright ?1997-2001 Angus Johnson and Anders Melander. All rights reserved. The software is copyrighted as noted above. It may be freely copied, modified, and redistributed, provided that the copyright notice(s) is preserved on all copies. The Drag and Drop Component Suite is freeware and we would like it to remain so. This means that it may not be bundled with commercial libraries or sold as shareware. You are welcome to use it in commercial and shareware applications providing you do not charge for the functionality provided by the Drag and Drop Component Suite. There is no warranty or other guarantee of fitness for this software, it is provided solely "as is". You are welcome to use the source to make your own modified components, and such modified components may be distributed by you or others if you include credits to the original components, and do not charge anything for your modified components. ------------------------------------------- 12. Version 4 release history: ------------------------------------------- 16-dec-2001 * Ported to C++ Builder 4. * Released for test as v4.1 FT5. 12-dec-2001 * Fixed C++ Builder name clash between TDropComboTarget.GetMetaFile and the GetMetaFile #define in wingdi.h 1-dec-2001 * The IAsyncOperation interface is now also declared as IAsyncOperation2 and all references to IAsyncOperation has been replaced with IAsyncOperation2. This was done to work around a bug in C++ Builder. Thanks to Jonathan Arnold for all his help with getting the components to work with C++ Builder. Without Jonathan's help version 4.1 would prabably have shipped witout C++ Builder support and certainly without any C++ Builder demos. * Demo applications for C++ Builder. The C++ Builder demos were contributed by Jonathan Arnold. 27-nov-2001 * TCustomDropTarget.Droptypes property renamed to DropTypes (notice the case). Thanks to Krystian Brazulewicz for spotting this. 24-nov-2001 * The GetURLFromString function in the DragDropInternet unit has been made public due to user request. 21-nov-2001 * Modified MakeHTML function to comply with Microsoft's description of the CF_HTML clipboard format. * Added MakeTextFromHTML function to convert CF_HTML data to plain HTML. Provides the reverse functionality of MakeHTML. * Added HTML support to TTextDataFormat class and TDropTextSource and TDropTextTarget components. * Fixed C++ Builder 5 problem with IAsyncOperation. * Released for test as v4.1 FT4. 10-nov-2001 * Added NetscapeDemo demo application. Demonstrates how to receive messages dropped from Netscape. This demo was sponsored by ThoughtShare Communications Inc. * Released for test as v4.1 FT3. 23-oct-2001 * Conversion priority of TURLDataFormat has been changed to give the File Group Descritor formats priority over the Internet Shortcut format. This resolves a problem where dropping an URL on the desktop would cause the desktop to assume that an Active Desktop item was to be created instead of an Internet Shortcut. Thanks to Allen Martin for reporting this problem. By luck this modification also happens to work around a bug in Mozilla and Netscape 6; Mozilla incorrectly supplies the UniformResourceLocator clipboard format in unicode format instead of ANSI format. Thanks to Florian Kusche for reporting this problem. * Added support for TFileGroupDescritorWClipboardFormat to TURLDataFormat. * Added declaration of FD_PROGRESSUI to DragDropFormats. * Added TURLWClipboardFormat which implements the "UniformResourceLocatorW" (a.k.a. CFSTR_INETURLW) clipboard format. Basically a Unicode version of CFSTR_SHELLURL/CFSTR_INETURL. The TURLWClipboardFormat class isn't used anywhere yet but will probably be supported by TURLDataFormat (and thus TDropURLTarget/TDropURLSource) in a later release. * Added experimental Shell Drag Image support. This relies on undodumented shell32.dll functions and probably won't be fully support before v4.2 (if ever). See InitShellDragImage in DropSource.pas. Thanks to Jim Kueneman for bringning these functions to my attention. 13-oct-2001 * TCustomDropSource.Destroy and TCustomDropMultiSource.Destroy changed to call FlushClipboard instead of EmptyClipboard. This means that clipboard contents will be preserved when the source application/component is terminated. * Added clipboard support to VirtualFileStream demo. * Modified VirtualFileStream demo to work around clipboard quirk with IStream medium. * Modified TCustomSimpleClipboardFormat to disable TYMED_ISTORAGE support by default. At present TYMED_ISTORAGE is only supported for drop targets and enabling it by default in TCustomSimpleClipboardFormat.Create caused a lot of clipboard operations (e.g. copy/paste of text) to fail. Thanks to Michael J Marshall for bringing this problem to my attention. * Modified TCustomSimpleClipboardFormat to read from the the TYMED_ISTREAM medium in small (1Mb) chunks and via a global memory buffer. This has resultet in a huge performance gain (several orders of magnitude) when transferring large amounts of data via the TYMED_ISTREAM medium. 3-oct-2001 * Fixed bug in TCustomDropSource.SetImageIndex. Thanks to Maxim Abramovich for spotting this. * Added missing default property values to TCustomDropSource. Thanks to Maxim Abramovich for spotting this. * DragDrop.pas and DragDropContext.pas updated for Delphi 4. * Reimplemented utility to convert DFM form files from Delphi 5/6 test format to Delphi 4/5 binary format. * Improved unregistration of Shell Extensions. Shell extension now completely (and safely) remove their registry entries when unregistered. * Deprecated support for C++ Builder 3. * Released for test as v4.1 FT2. 25-sep-2001 * Rewritten ContextMenuHandlerShellExt demo. The demo is now actually a quite useful utility which can be used to register and unregister ActiveX controls, COM servers and type libraries. It includes the same functionality as Borland's TRegSvr utility. 20-sep-2001 * Added support for cascading menus, ownerdraw and menu bitmaps to TDropContextMenu component. * Modified TFileContentsStreamOnDemandClipboardFormat to handle invalid parameter value (FormatEtcIn.lindex) when data is copied to clipboard. This works around an apparent bug in the Windows clipboard. Thanks to Steve Moss for reporting this problem. * Modified TEnumFormatEtc class to not enumerate empty clipboard formats. Thanks to Steve Moss for this improvement. 1-sep-2001 * Introduced TCustomDropTarget.AutoRegister property. The AutoRegister property is used to control if drop target controls should be automatically unregistered and reregistered when their window handle is recreated by the VCL. If AutoRegister is True, which is the default, then automatic reregistration will be performed. This property was introduced because the hidden child control, which is used to monitor the drop target control's window handle, can have unwanted side effects on the drop target control (e.g. TToolBar). * Deprecated support for Delphi 3. 22-jun-2001 * Redesigned TTextDataFormat to handle RTF, Unicode, CSV and OEM text without conversion. Moved TTextDataFormat class to DragDropText unit. Added support for TLocaleClipboardFormat. * Surfaced new text formats as properties in TDropTextSource and TDropTextTarget. Previous versions of the Text source and target components represented all supported text formats via the Text property. In order to enable users to handle the different text formats independantly, the text source and target components now has individual properties for ANSI, OEM, Unicode and RTF text formats. The text target component can automatically synthesize some of the formats from the others (e.g. OEM text from ANSI text), but applications which previously relied on all formats being represented by the Text property will have to be modified to handle the new properties. * Added work around for problem where TToolBar as a drop target would display the invisible target proxy window. * Fixed wide string bug in WriteFilesToZeroList. Thanks to Werner Lehmann for spotting this. 15-jun-2001 * Added work-around for Outlook Express IDataObject.QueryGetData quirk. 3-jun-2001 * Ported to C++ Builder 4 and 5. * Added missing DragDropDesign.pas unit to design time packages. * First attempt at C++ Builder 3 port.... failed. * Improved handling of oversized File Group Descriptor data. * Added support for IStorage medium to TFileContentsStreamClipboardFormat. This allows the TDropComboTarget component to accept messages dropped from Microsoft Outlook. This work was sponsored by ThoughtShare Communications Inc. 23-may-2001 * Ported to Delphi 4. * First attempt at C++ Builder 5 port.... failed. 18-may-2001 * Released as version 4.0. Note: Version 4.0 was released exclusively on the Delphi 6 Companion CD. * ContextMenuDemo and DropHandlerDemo application has been partially rewritten and renamed. ContextMenuDemo is now named ContextMenuHandlerShellExt. DropHandlerDemo is now named DropHandlerShellExt. * TDropContextMenu component has been rewitten. The TDropContextMenu now implements a context menu handler shell extension. In previous releases it implemented a drag drop handler shell extension. * The DragDropHandler.pas unit which implements the TDropHandler component has been renamed to DropHandler.pas. * Added new TDragDropHandler component. The new component, which lives in the DragDropHandler unit, is used to implement drag drop handler shell extensions. * Added DragDropHandlerShellExt demo application. * Removed misc incomplete demos from kit. * Fixed minor problem in VirtualFileStream demo which caused drops from the VirtualFile demo not to transfer content correctly. 11-may-2001 * Converted all demo forms to text DFM format. This has been nescessary to maintain compatibility between all supported versions of Delphi. * Fixed a bug in GetPIDLsFromFilenames which caused drag-link of files (dtLink with TDropFileSource) not to work. * Added readme.txt files to some demo applications. * Added missing tlb and C++ Builder files to install kit. * Released as FT4. 6-may-2001 * Added missing dfm files to install kit. * Tested with Delphi 5. Fixed Delphi 5 compatibility error in main.dfm of DragDropDemo. * Removed misc compiler warnings. * The AsyncTransferTarget and OleObjectDemo demos were incomplete and has been removed from the kit for the V4.0 release. The demos will be included in a future release. * Released as FT3. 3-may-2001 * Added missing dpr and bpg files to install kit. * Updated readme.txt with regard to lack of C++ Builder demos. * Released as FT2. 29-apr-2001 * Cleaned up for release. * Released as FT1. 23-feb-2001 * Modified TCustomDropTarget.FindTarget to handle overlapping targets (e.g. different targets at the same position but on different pages of a page control or notebook). Thanks to Roger Moe for spotting this problem. 13-feb-2001 * Renamed AsyncTransfer2 demo to AsyncTransferSource. * Added AsyncTransferTarget demo. * Replaced TChart in AsyncTransfer2 demo with homegrown pie-chart-thing. * Modified all IStream based target formats to support incremental transfer. * URW533 problem has finally been fixed. The cause of the problem, which is a bug in Delphi, was found by Stefan Hoffmeister. * Fixed free notification for TDropContextmenu and TDataFormatAdapter. 27-dec-2000 * Moved TVirtualFileStreamDataFormat and TFileContentsStreamOnDemandClipboardFormat classes from VirtualFileStream demo to DragDropFormats unit. * Added TClipboardFormat.DataFormat and TClipboardFormats.DataFormat property. * Added TDropEmptySource and TDropEmptyTarget components. These are basically do-nothing components for use with TDataFormatAdapter. * Rewritten AsyncTransfer2 demo. The demo now uses TDropEmptySource, TDataFormatAdapter and TVirtualFileStreamDataFormat to transfer 10Mb of data with progress feedback. * Rewritten VirtualFileStream demo. The demo now uses TDropEmptySource, TDropEmptyTarget, TDataFormatAdapter and TVirtualFileStreamDataFormat. * Fixed memory leak in TVirtualFileStreamDataFormat. This leak only affected the old VirtualFileStream demo. * Added support for full File Descriptor attribute set to TVirtualFileStreamDataFormat. It is now possible to specify file attributes such as file size and last modified time in addition to the filename. I plan to add similar features to the other classes which uses FileDescriptors (e.g. TDropFileSource and TDropFileTarget). 21-dec-2000 * Ported to Delphi 4. * Added workaround for design bug in either Explorer or the clipboard. Explorer and the clipboard's requirements to the cursor position of an IStream object are incompatible. Explorer requires the cursor to be at the beginning of stream and the clipboard requires the cursor to be at the end of stream. 15-dec-2000 * Fixed URW533 problem. I'll leave the description of the workaround in here for now in case the problem resurfaces. 11-dec-2000 * Fixed bug in filename to PIDL conversion (GetPIDLsFromFilenames) which affected TDropFileTarget. Thanks to Poul Halgaard J鴕gensen for reporting this. 4-dec-2000 * Added THTMLDataFormat. * Fixed a a few small bugs which affected clipboard operations. * Added {$ALIGN ON} to dragdrop.inc. Apparently COM drag/drop requires some structures to be word alligned. This change fixes problems where some of the demos would suddenly stop working. * The URW533 problem has resurfaced. See the "Known problems" section below. 13-nov-2000 * TCopyPasteDataFormat has been renamed to TFeedbackDataFormat. * Added support for the Windows 2000 "TargetCLSID" format with the TTargetCLSIDClipboardFormat class and the TCustomDropSource.TargetCLSID property. * Added support for the "Logical Performed DropEffect" format with the TLogicalPerformedDropEffectClipboardFormat class. The class is used internally by TCustomDropSource. 30-oct-2000 * Added ContextMenu demo and TDropContextMenu component. Demonstrates how to customize the context menu which is displayed when a file is dragged with the right mouse button and dropped in the shell. * Added TCustomDataFormat.GetData. With the introduction of the GetData method, Data Format classes can now be used stand-alone to extract data from an IDataObject. 20-oct-2000 * Added VirtualFileStream demo. Demonstrates how to use the "File Contents" and "File Group Descritor" clipboard formats to drag and drop virtual files (files which doesn't exist physically) and transfer the data on-demand via a stream. 14-oct-2000 * Added special drop target registration of TCustomRichEdit controls. TCustomRichEdit needs special attention because it implements its own drop target handling which prevents it to work with these components. TCustomDropTarget now disables a rich edit control's built in drag/drop handling when the control is registered as a drop target. * Added work around for Windows bug where IDropTarget.DragOver is called regardless that the drop has been rejected in IDropTarget.DragEnter. 12-oct-2000 * Fixed bug that caused docking to interfere with drop targets. Thanks to G. Bradley MacDonald for bringing the problem to my attention. 30-sep-2000 * The DataFormats property has been made public in the TCustomDropMultiTarget class. * Added VirtualFile demo. Demonstrates how to use the TFileContentsClipboardFormat and TFileGroupDescritorClipboardFormat formats to drag and drop a virtual file (a file which doesn't exist physically). 28-sep-2000 * Improved drop source detection of optimized move. When an optimized move is performed by a drop target, the drop source's Execute method will now return drDropMove. Previously drCancel was returned. The OnAfterDrop event must still be used to determine if a move operation were optimized or not. * Modified TCustomDropTarget.GetPreferredDropEffect to get data from the current IDataObject instead of from the VCL global clipboard. 18-sep-2000 * Fixed bug in DropComboTarget caused by the 17-sep-2000 TStreams modification. 17-sep-2000 * Added AsyncTransfer2 demo to demonstrate use of TDropSourceThread. * Renamed TStreams class to TStreamList. 29-aug-2000 * Added TDropSourceThread. TDropSourceThread is an alternative to Windows 2000 asynchronous data transfers but also works on other platforms than Windows 2000. TDropSourceThread is based on code contributed by E. J. Molendijk. 24-aug-2000 * Added support for Windows 2000 asynchronous data transfers. Added IAsyncOperation implementation to TCustomDropSource. Added TCustomDropSource.AllowAsyncTransfer and AsyncTransfer properties. 5-aug-2000 * Added work around for URW533 compiler bug. * Fixed D4 and D5 packages and updated a few demos. Obsolete DropMultiTarget were still referenced a few places. * Documented work around for C++ Builder 5 compiler error. See the Known Problems section later in this document for more information. 2-aug-2000 * The package files provided in the kit is now design-time only packages. In previous versions, the packages could be used both at design- and run-time. The change was nescessary because the package now contains design-time code. * Added possible work around for suspected C++ Builder bug. The bug manifests itself as a "Overloadable operator expected" compile time error. See the "Known problems" section of this document. * Rewrote CustomFormat1 demo. * Added CustomFormat2 demo. * TDataDirection members has been renamed from ddGet and ddSet to ddRead and ddWrite. * All File Group Descritor and File Contents clipboard formats has been moved from the DragDropFile unit to the DragDropFormats unit. * File Contents support has been added to TTextDataFormat. The support is currently only enabled for drop sources. * Renamed TDropMultiTarget component to TDropComboTarget. Note: This will break applications which uses the TDropMultiTarget component. You can use the following technique to port application from previous releases: 1) Install the new components. 2) Repeat step 3-8 for all units which uses the TDropMultiTarget component. 3) Make a backup of the unit (both pas and dfm file) just in case... 4) Open the unit in the IDE. 5) In the .pas file, replace all occurances of "TDropMultiTarget" with "TDropComboTarget". 6) View the form as text. 7) Replace all occurances of "TDropMultiTarget" with "TDropComboTarget". 8) Save the unit. * Renamed a lot of demo files and directories. * Added work around for yet another bug in TStreamAdapter. * Added TCustomStringClipboardFormat as new base class for TCustomTextClipboardFormat. This changes the class hierachy a bit for classes which previously descended from TCustomTextClipboardFormat: All formats which needs zero termination now descend from TCustomTextClipboardFormat and the rest descend from TCustomStringClipboardFormat. Added TrimZeroes property. Fixed zero termination bug in TCustomTextClipboardFormat and generally improved handling of zero terminated strings. Disabled zero trim in TCustomStringClipboardFormat and enabled it in TCustomTextClipboardFormat. 23-jul-2000 * Improved handling of long file names in DropHandler demo. Added work around for ParamStr bug. * Added TDataFormatAdapter component and adapter demo. TDataFormatAdapter is used to extend the existing source and target components with additional data format support without modifying them. It can be considered an dynamic alternative to the current TDropMultiTarget component. 17-jul-2000 * TDropHandler component and DropHandler demo fully functional. 14-jul-2000 * Tested with C++ Builder 5. * Fixed sporadic integer overflow bug in DragDetectPlus function. * Added shell drop handler support with TDropHandler component. This is a work in progress and is not yet functional. 1-jul-2000 * Tested with Delphi 4. * Support for Windows 2000 inter application drag images. * TRawClipboardFormat and TRawDataFormat classes for support of arbitrary unknown clipboard formats. The classes are used internally in the TCustomDropSource.SetData method to support W2K drag images.
Update : 2011-12-21 Size : 2130304 Publisher : smj_9547
【GUI Develop】 histogram_control DL : 0: 象win95里系统监视器里的逐渐向左移动的窄柱壮图-An narrow bar graph moving to left gradually which likes win95 s system monitor
Update : 2024-05-19 Size : 13312 Publisher : 站长
【OS program】 perfstate_demo DL : 0: Win9x性能监视的程序，可以监测很多参数 -The app of monitoring behaviour in win9x, it can monitor many parameters
Update : 2024-05-19 Size : 35840 Publisher : 站长
【Multi Monitor】 mulmon DL : 0: 多显示器编程控件 -The control for multi-monitor programming
Update : 2024-05-19 Size : 160768 Publisher : 站长
【Sniffer Package capture】 websniff DL : 0: 监听分析HTTP数据包获取web用户密码的程序 -Monitor HTTP packets and Get the password of web user
Update : 2024-05-19 Size : 5120 Publisher : 站长
【mpeg mp3】 mpeg_bits-1.0b-src.tar DL : 0: Berkeley Plateau Research Group MPEG-1 stream monitor sources
Update : 2024-05-19 Size : 139264 Publisher : 站长
【Sniffer Package capture】 w2k_ipmon DL : 0: win2000下的IP数据包监视程序，需要ip helper api才能编译-win2000 IP data packet monitor program, needs ip helper api to be able to translate
Update : 2024-05-19 Size : 39936 Publisher : 站长
【ISAPI-IE】 viewiislog DL : 0: 通过访问日志来监视访问iis服务器的客户端地址-Monitor client addresses of iis server through visiting logs
Update : 2024-05-19 Size : 17408 Publisher : 姚燕南
【Windows Develop】 watch_input DL : 0: 监视多久没有输入的程序--Program which can monitor how long it is since the last input
Update : 2024-05-19 Size : 6144 Publisher : cunion-sxq
【OS program】 CDirectoryChangeWatcher DL : 0: 监视桌面改变的几个类代码--Several classes codes which can monitor the desktop`s exchanging
Update : 2024-05-19 Size : 21504 Publisher : 站长

« 1 2 ... 42 43 44 45 46 4748 49 50 »